[4Lo]

It has cast wedges. The radius arms are attatched but they have been cut right before the mount at the frame. It is complete minus one hub and spindle. No coil or shock mounts but the coils are there. Steering including the track bar and mount are there as well. 5 bolt knuckles and I don't know the gearing.

Bring help it is a heavy b!tch.

$60cash

or trade for:

a $50 tim card, a decent sized bench vise, an old tent ttrailer frame, scrap steel specifically 1/4'' plate or some angle iron, tools or anything else that sparks my interest.

 

[4Lo]

You know what I just want it out of the yard so the first $60 takes it.

 

[snowracer]

where is it located

 

[4Lo]

abby

 

[steve604]

what are you using for your dakota then? do you have another axle?

 

[4Lo]

yes i have 2. I was going to use parts off this one but I decided to just go all new on the other housing.

 

[cole4x4]

hi interested in the dana 44 can pick up tmo if it is still there

 

[Jason Funk]

What side is the diff on?

Thanks

 

[4Lo]

What side is the diff on?

Thanks

D/S

 

[4Lo]

hi interested in the dana 44 can pick up tmo if it is still there

Yup bring $50 and help.

 

[cole4x4]

hey i wont be able to pic the axle up till stdy

 

[4Lo]

Okay as long as I know you want it cause I will be honest with you it's leaving my yard whether you pick it up or not saturday by 4pm.

 

[cole4x4]

ok my email adress is [email protected] i would be able to pick it up around 10ish could u email me ur adress or fone number thnks

 

[4Lo]

here

steve 604-817-4023 call me and I will give you the address

 

[4Lo]

Gone thanx guys for the help.