BC 4x4 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I have front and rear rebuilt (aftermarket ring and pinion) differentials from a 1993 Toyota 4Runner (V6 3.0L) with 260,000 km. The front diff has no A.D.D. Geared for 5.29 ratio, no lockers on diffs.

Bought this truck 5 months ago and these were the diffs that came on it. I'm not interested in lifting the truck and putting bigger tires on it, so I've swapped them out for a lower ratio. I do not have the information on when the diffs were rebuilt or how many kms have been put on them since, but I had no problems with them on light to medium off-roading, as well as lots of highway driving. Fluid came clean out of both diffs when I swapped them out, with no dirt, grime, or metal shavings. Pinion bearings feel fine. No rust on housings. Swap can be done in a day with basic tools and mechanical know-how.

Can be picked up in East End Vancouver, or delivery in Vancouver area can be arranged. $600 for both the front and rear.
 
1 - 2 of 2 Posts
Top