BC 4x4 Forums banner
41 - 47 of 47 Posts

·
Registered
Joined
·
44 Posts
Very nice. Im jelous, id give a lot to be able to work in a custom 4x4 shop.:beer_cheers:
 

·
Registered
Joined
·
3,952 Posts
Discussion Starter · #44 ·
so a little time this weekend to get a little done ...
I'm bracing the front shock towers and building the front "tube" section , so I needed to get my real engine in , which I still need to add some things to , so I can make sure all my clearances will work

so out of it covered shrink wrapped casing it comes



and into place
I have also started on the brackets for the supports









.
 

·
Registered
Joined
·
5,837 Posts
You know, that's pretty cool for a street truck.
 

·
Registered
Joined
·
3,952 Posts
Discussion Starter · #46 ·
so , with the tranny out again , I needed to make a modification for the speedo cable . plasma cut out the section that was interfering , and used a piece of 2" tube to fit .. should work






.
 

·
Registered
Joined
·
3,952 Posts
Discussion Starter · #47 ·
still not welded as my weekend is over ... but heres where the "cage" is starting

as previously mentioned .. supports made and now tacked into place





and then bent the support struts ....





not welded yet .. so just a rough mock up


.
 
41 - 47 of 47 Posts
Top