BC 4x4 Forums banner
1 - 20 of 24 Posts

·
Registered
Joined
·
76 Posts
Discussion Starter · #1 ·
Hey.....

Does any know were I can get a used 4.0L throttle body? And how much should I expect to pay?

Thanks

Angelo
 

·
Registered
Joined
·
142 Posts
I've got one, actually a complete 4.0 that I want to get rid of. I have no idea what the throttle body is worth, but I'll try and find out tomorrow and give you a price.
 

·
Got Arbutus?
Joined
·
1,269 Posts
how many kms on the 4L. what you looking for ($) ?

------------------
'93 sahara ~ rancho springs, SOA, EB axles, detroit, 35s, and hi steer in the works
 

·
Registered
Joined
·
142 Posts
Corn, the engine had 320 km on it when pulled. It ran fine, just went through some oil. I pulled it because I found a 4.0 with supposedly 120km on it, ya right, my engine I pulled ran the same as the one in my jeep. Anyways, I want a hundred and something for it. Itis complete with fuel injection system on it as well.
Phil
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #5 ·
Hi Broncoless,

Just give me a price.....all I need is the TB.

Angelo
 

·
Registered
Joined
·
24 Posts
Originally posted by aandre:
Hey.....

Does any know were I can get a used 4.0L throttle body? And how much should I expect to pay?

Thanks

Angelo
You might want to try Gary's Auto Wrecking in Maple Ridge. They seem to carry alot of Jeep stuff.



------------------
If you can't stop....
smile as you go under!
99 XJ, 4.5" RE Super Flex, 1.5" shackle / spacers,33"x12.5" MTR's (coming to you soon....8" Sky Jacker suspension (woohoo!)
 

·
Registered
Joined
·
539 Posts
and they charge acordingly, ouch

------------------
BIG ASS black/chromed YJ, 11" lift 35" tires, 400hp corvett engine
 

·
Registered
Joined
·
327 Posts
Last time I called him there for a throttle body he wanted a hundred bucks seems steep..
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #9 ·
Just talked to Gary's and they wanted 100 for it. It does sound a bit steep for the TB. At least a used one.
 

·
Registered
Joined
·
142 Posts
Seems like everyone phoned Gary's, I did as well and yep, $100. I'll sell it cheaper for sure. Call me at 418-4061 or e-mail me and we can haggle over the price.
Phil
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #12 ·
Hey Phil,

Check your email and let the haggling begin.
:)

Angelo

Originally posted by broncoless:
Seems like everyone phoned Gary's, I did as well and yep, $100. I'll sell it cheaper for sure. Call me at 418-4061 or e-mail me and we can haggle over the price.
Phil
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #13 ·
Well....Thanks Phil for your help.

I'm still looking for a used 4.0L throttle body. I would like to see if I can find one that you guys are willing to part with before I go to Gary's.

Thanks
Angelo
 

·
Registered
Joined
·
1,841 Posts
what vintage of 4.0 are you needing? if I remember correctly there is a difference between HO and non HO 4.0's

------------------
-'85 XJ Pioneer,2dr,4cyl,5spd,31x10.5's,2" lift,onboard air(workin on it now)
-'82 J-10 Project truck, 258 straight 6, 5spd, 30x9.5's
"its not what you drive, or where you drive,
its driving what you have to where you want to go"
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #15 ·
Probably a non HO 4.0.
Whats the difference between the two?


Originally posted by crazyguy:
what vintage of 4.0 are you needing? if I remember correctly there is a difference between HO and non HO 4.0's



------------------
My RigRater Score: 279RRv1.0 with a BOA of 15.04 -- http://www.rigrater.com
 

·
Registered
Joined
·
1,841 Posts
im not sure if there is actually a difference ive just read somthing bout tps not being the same so im only assuming the rest could be different.

anyway I have a throttle body from a non HO 4.0, actually I have the entire intake with injector rail(if I can find it) minus EGR if ya want it all, even got a nice factory tubular steel exhaust header(again also non HO, this is the '89-'90 version)

if you want the throttle body how does $50 sound?

------------------
-'85 XJ Pioneer,2dr,4cyl,5spd,31x10.5's,2" lift,onboard air(workin on it now)
-'82 J-10 Project truck, 258 straight 6, 5spd, 30x9.5's
"its not what you drive, or where you drive,
its driving what you have to where you want to go"
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #17 ·
Sure that sounds good......

Send me an email at [email protected] or call me at 783-4790 and we can figure out all the fine details.

Thanks ... you don't know how long I've been looking for that!

Angelo

------------------
My RigRater Score: 279RRv1.0 with a BOA of 15.04 -- http://www.rigrater.com
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #18 ·
Hey Crazyguy......

One question....is the TB 4 bolt or 3 bolt pattern?

Angelo

------------------
My RigRater Score: 279RRv1.0 with a BOA of 15.04 -- http://www.rigrater.com
 

·
Registered
Joined
·
1,841 Posts
the mounting bolts? it has 3 in a triangle

------------------
-'85 XJ,2dr,4cyl,5spd,31x10.5's,2"lift,onboard air,bla,bla,bla,
-'82 J-10 Project truck, 258 straight 6, 5spd, 30x9.5's
"its not what you drive, or where you drive,
its driving what you have to where you want to go"
 

·
Registered
Joined
·
76 Posts
Discussion Starter · #20 ·
I need the one that has 4 mounting bolts.

I believe from a 4.0 from 91 - 95 or so.

Thanks anyways .....my search continues.....

------------------
My RigRater Score: 279RRv1.0 with a BOA of 15.04 -- http://www.rigrater.com
 
1 - 20 of 24 Posts
Top