BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
75 Posts
http://www.geocities.com/Baja/Outback/3574/Rocklobster.html

You can try to get the gears you need from suzuki and have Breeze cut and weld them for about $200.

Or, you can buy the gears from one of the vendors in the US. I think Trail Tough was the cheapest last time I looked.

Either way it will cost you between $700-1000.

For both methods you will need to install the gears yourself but that's quite easy to do and will help you learn how the t-case works. The hardest part is getting the flange nuts off.

HTH,
Robin.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top