BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter · #1 ·
want to know what i have ie:front diff, rear diff, transfer case and tranny. i think the front is a high pinion 30?

can the front shafts from an 95+ be swapped to my axle or do i have to swap the whole axle?

thanks for the help
Brad

------------------
when in doubt, hammer the gas
81 toy 4.5-5"lift, rebuilt 22r, homebuilt bumpers, 33 mud kings JDgreen, 4.37's*for sale*
now have_87xj w/5' lift, snorkel, roof rack, 8000 warn, 33" mud kings and rust
 

·
Registered
Joined
·
5,837 Posts
You've got a reverse cut 30 up front, Dana 35 in the rear.
You can swap the inner shafts but you cant swap the outer shafts, the bearing thingy is different so the outer stub shafts are a different length or have the collar in the wrong place or something like that.

------------------
Dan
91 Cherokee, 3" body lift, 2" front lift blocks, Warn XD900i winch, custom narrowed rear seat.
Herd of Turtles Four Wheel Drive Society
 

·
Registered
Joined
·
50 Posts
Discussion Starter · #3 ·
Originally posted by Dan:
You've got a reverse cut 30 up front, Dana 35 in the rear.
You can swap the inner shafts but you cant swap the outer shafts, the bearing thingy is different so the outer stub shafts are a different length or have the collar in the wrong place or something like that.

so that means i would have to get some aftermarket outers because of the u-jiont difference?

------------------
when in doubt, hammer the gas
81 toy 4.5-5"lift, rebuilt 22r, homebuilt bumpers, 33 mud kings JDgreen, 4.37's*for sale*
now have_87xj w/5' lift, snorkel, roof rack, 8000 warn, 33" mud kings and rust
 
1 - 3 of 3 Posts
Top