BC 4x4 Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter · #1 ·
Sorry if this is in the wrong section.

Ok, so im using an earls hydraulic line for my clutch with female -3 AN ends, and the matching adapters to fit to my clutch master/slave. My question is, do I use anti-seize and/or locktite?
 

·
Registered
Joined
·
395 Posts
nothing needed on an hyd fittings
 

·
Registered
Joined
·
395 Posts
IF I had a gas tank and was installing a 7/8 npt to an fitting , I would use sealant on the threads into the tank but nothing on the an side ever , they are designed to seal like a brake line with the flair ,you could never seize the an threads but I never have
 

·
Registered
Joined
·
1,841 Posts
use thread lube/sealent on the pipe thread side of any fitting that has pipe thread.
 
1 - 5 of 5 Posts
Top