BC 4x4 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
123 Posts
Discussion Starter · #1 ·
I know my bolt pattern is 5 on something, does anyone know what it is? I want to know if Ford rims 5 x 5.5 would fit.

Thanx

------------------
97 RAM SPORT 3" susp., 33" tires, lots of extras, soon to have a gun rack!! , 82 CJ5, Warn 8000lb, body armour, lights, lifted w/ 33" BFG's,
 

·
Registered
Joined
·
83 Posts
On your CJ, a Ford pickup wheel will fit depending on centerhole size, on the Dodge, better test fit (the bolt circle is the same, but test fit the wheel anyway)

------------------
if it ain't broke, you don't go hard enough!
 

·
Registered
Joined
·
382 Posts
I think the half ton Dodge uses the same 5 on 5.5 pattern as the CJ, and Ford (and Suzuki,Scout,....)
the only difference Is the Dodge uses a different offset (to clear the brakes....I think..)

------------------
1948 WILLYS flatfender
Gradually becoming un-toyotafied.......Got 4.3???
http://www.ottindustries.com
 

·
Registered
Joined
·
282 Posts
Ford uses "hub-centric" mounting meaning the center hole locates the wheel. They probably wont fit over the Dodge hubs although the bolt circle may be the same. Dodge changed a few times but most are 5 on 5.5

------------------
97 ram 1500 swb.3" w/35"at. 4.56 w/rear detroit
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top