BC 4x4 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
i am having difficulty tracing the problem with my brake lights. my signals work my fuses seem to be intact but my brake light do not work. has anyone dealt with this or knows how to fix it. i do not have a third light and dont want to pay the 100 plus the shops ask to fix it. thanks
 

·
Premium Member
Joined
·
1,541 Posts
It might be the sensor underneith the peddle

------------------
92 Jeep YJ with 1 inch shackle lift and a 2 inch body lift running 31's
 

·
Registered
Joined
·
2,513 Posts
What type of Jeep is it?

Your brake light switch is most likely the problem if both lights are out though. The switch is normally mounted near the top of your brake pedal.


------------------
Jon B.
'82 CJ7 Some mods (Hers)
'82 CJ7 More mods (His)
'02 Chev 3500 LT D/A
 

·
Silverback
Joined
·
100 Posts
Don't mean to be a dick, but you've checked the brake light right? If it's burnt out the whole system goes down, I assume you've changed it.

My girlfriend had the same problem, and a little WD40 on the brake line at the pedal cleared it all up. The brake pedal wasn't quite releasing all the way.



------------------
-'95 YJ
 

·
Registered
Joined
·
183 Posts
just replace the fuse to be on the safe side

------------------
81 bronco, 35" mud kings, 6 inch lift , 1 inch body lift,ALARM, cb.
8000lb warn winch.
OH DID I MENSION I HAVE AN alarm!?
AND THIS TRUCK IS FOR SALE
 
1 - 6 of 6 Posts
Top