BC 4x4 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
266 Posts
Discussion Starter · #1 ·
3\4 ton chevy diffs 8 bolt dana 44 front with cross over steering and 14 bolt full floater rear gears not important but would like 4.10 or 4.56 call me or post message
Derek 604-607-0340
Oh ya reasonably priced.

------------------
1992 LADA Niva Stock
 

·
Registered
Joined
·
79 Posts
8 bolt dana 44 front with cross over steering

Crossover steering was never factory...
To do a crossover set-up you'll need a 2wd Chevy steering box, a flat top D44 passenger side knuckle, and a custom drag link.
The D44 flat top will need to be milled flat and drilled/tapped for the steering arm studs.

Also watch for what era D44 is being offered. By the end of their run under GM trucks they were good. pre 75 have external hubs, smaller axle u-joints etc etc.

If you already have a 1/2 ton D44 you can just swap the from the knuckles out to convert it to a 3/4 ton version. 10 bolt outer will work on the D44 too...

Just some info that might help your search.

Rene

------------------
God hates a coward!
 
1 - 2 of 2 Posts
Top