BC 4x4 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
44 Posts
Discussion Starter · #1 ·
Hey, im gonna , splice a double cardon joint on to my driveshaft, I Have to shorten the shaft by 15 inches, so I thought because of the angle of the shaft. I would add a double cardon joint from a spare front driveshaft. Now where should that joint be, at the pumpkin or at the transfer case.?


------------------
84 xcab shortened 16inches, 3 lift, welded rear, 24$ paint, flatbed
 

·
Registered
Joined
·
1,150 Posts
That joint should be a the t-case end.
Remember to have it balanced properly, hose clamps don't count.

------------------
75 FJ40, 4 inch BDS springs,1inch body, 35's, detroit locker, power steering, disc brakes, 3spd low range gears, full cage, XD9000i, extended shackles, dual batteries....you get the idea.
 
1 - 2 of 2 Posts
Top