[bradmad]

Ok guys, I am doing the lift.
My question is, what else do I need to get in order to do this lift?

I heard some people mention yokes and other stuff - but basically I have a 3" bl the rest is stock..

What do I need to get done to make this thing driveable?

Thanks

PS. I am going to run 35" tires which should be no problem but dont wanna do a gear change.

------------------
1987 3" lifted YJ with 31" KOs new paint etc.

 

[bushbuggy]

What gears do you have right now?
3.07 or 3.55
If you have 3.07 35s will really suck. With 3.55 it will be tolerable but you will have no pick up.

------------------
This 4x4 thing is starting to take away from my beer fund.

 

[bradmad]

I have 3.55
Ryan gave me some good tips on what I need as he just did the lift as well, so I am good for now thanks

I might have to stick with 33s unless I can get some 35s at a good price.
Got some nice 33s in the area already.

------------------
1987 3" lifted YJ with 31" KOs new paint etc.

 

[pitter]

If you don't want to do a gear swap then you could do an axle swap from a 4 banger, with 410's you can sometimes get these cheap because people swap these out all the time. that would be good with 35's

------------------
Sold 85 Toyota extra cab 4x4 2" lift 33" BFG M/T with lots of tire rub!
Wanted 84/85 4runner, needed a few more seats less rust, and a beter FRAME.

 

[RYJAY]

3" BL and 4" suspension...
i'd save the hassle and go 4.56's
you're gonna be runnin 35's at some point anyways


------------------
1992 YJ with 33's

 

[bradmad]

Going to hold out on the lift for the next couple months. Ran dry on cash...

Thanks for the info guys.

------------------
1987 3" lifted YJ with 31" KOs new paint etc.