BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
127 Posts
Discussion Starter · #1 ·
So I installed my 1.5 coils in the back of my 93 runner, fixed my shocks to get the most flex, but when it flexs out my driveshaft hits my gas tank. I heard you have to shorten the width on the tank is this true? or is there another easy remedy(besides putting a limit strap on. thanks
 

·
Registered
Joined
·
802 Posts
You have to add the drop bracket for the panhard rod; that will also relocate your axle back to center. Also you have to hammer the skid plate on your tank a bit, where the shaft contacts it.
 

·
Registered
Joined
·
127 Posts
Discussion Starter · #3 ·
my driveshaft flange hits the skidplate so I will hammer that in but the driveshaft also hits the tank so I guess I have to just try to smash that part of the tank in as well, thanks for the reply.
 
1 - 3 of 3 Posts
Top