BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
im about to buy a toyota it needs some front end work there is gear oil everywhere coming out the tires and on the knuckels he said something about king pins?? i just figured the seals were puked??? can someone help me out/?

------------------
1980 yota bondo job
 

·
Registered
Joined
·
1,150 Posts
Look at the other post for some info on the job. The one titled "steering knuckle oil seal". Make sure you replace the kingpin bearings also, not just the seals.
You'll get plenty greasy though, so get a lot of shop rags.
A saturday afternoon job.

------------------
75 FJ40, 4 inch BDS springs, 1inch body, 35's, detroit EZ locker, power steering, disc brakes, 3spd low range gears, full cage, XD9000i, extended shackles, dual batteries....you get the idea.

[This message has been edited by dp (edited January 31, 2002).]
 
1 - 3 of 3 Posts
Top