BC 4x4 Forums banner
1 - 6 of 6 Posts

·
Premium Member
Joined
·
1,541 Posts
Discussion Starter · #1 ·
I know u can put full doors with a soft top but can u put a hard top with half doors??


I have never seen it done b-4 but is it possible??

------------------
92 Jeep YJ with 1 inch shackle lift and a 2 inch body lift running 31's
 

·
Registered
Joined
·
158 Posts
You can but you would have to get fiberglass upper door halfs that are rounded to fit with the hard top. You can't use the canvas upper door halfs that you normally use with the soft top.

------------------
Play hard + Rest easy
Drive a Jeep--'92 YJ
 

·
Premium Member
Joined
·
1,541 Posts
Discussion Starter · #3 ·
Anyone know where i might get a set of those fiber glass upper half doors?? price??

------------------
92 Jeep YJ with 1 inch shackle lift and a 2 inch body lift running 31's
 

·
Superfly
Joined
·
8,221 Posts
Originally posted by Brent:
Anyone know where i might get a set of those fiber glass upper half doors?? price??


You can also use regular steel-frame with fabric skin door uppers, just get the ones that work with a hard-top. The difference is in the top rear corners. The hard-top ones are rounded. I've got a set on my YJ.

I've got two-piece fabric doors so mine probably won't work with the steel half-door (although I could be wrong). Email NSOR for a price on just the uppers that work with steel half-doors.

...lars


------------------
19911995409993004:144444.103512.58274

[This message has been edited by lars (edited December 27, 2001).]



 

·
Premium Member
Joined
·
1,541 Posts
Discussion Starter · #5 ·
thanks larry

------------------
92 Jeep YJ with 1 inch shackle lift and a 2 inch body lift running 31's
 

·
Registered
Joined
·
128 Posts
Hehe, or you can go Brad style and just close your soft half doors on top of the hard top and have a nice square lift over


------------------
1987 3" lifted YJ with 31" KOs new paint etc.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top