BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
107 Posts
Discussion Starter · #1 ·
I know have 32"x11.50 on my truck.
they rub on full turn on the springs was wondering were i could get some tire spacers from. Anyone ????
Mabey from Chris&Ben @ OTT ind ???
Thanks for the help
 

·
Registered
Joined
·
11 Posts
Might want to try bigger offset rims

------------------

88 1/2 Samurai. SPOA. YJ shackles,Dual tube bumper.235 duelers. Currently adding custom dents + scratches.
 

·
Registered
Joined
·
382 Posts
Sorry we don't make wheel spacers
The quickest and easiest way to solve the spring rubbing is to stack a couple of washers on the steering stop bolts ( the little 6mm (10 mm wrench size) bolts that hold the felt seal on to your knuckles you will notice that one on each side is bigger and that it is what contacts the housing first )
It will slightly limit the turning radius......but also it will take a lot of stress off of the Birfeild joints .... and save the tires


------------------
1948 WILLYS flatfender/toyota
Soon to require a Mile -per - year speedometer http://www.ottindustries.com
 
1 - 3 of 3 Posts
Top