[weldid]

I remember seeing a home made under drive on here about a year ago, It used the gear set from a 231. Can some one post some pics or info on this im try to do the same.

------------------
Drive it like you stole it

 

[Bones]

Is this it?
http://www.bc4x4.com/tech/bryce/tcase/tcase.cfm

 

[chris siebert]

Is it this one?

<img src=http://www3.bc.sympatico.ca/jeeppics/Dcp_0214.jpg>

 

[chris siebert]

It worked in the test area. What's with that?

 

[Bones]

 

[lars]

Originally posted by chris siebert:
Is it this one?

<img src=http://www3.bc.sympatico.ca/jeeppics/Dcp_0214.jpg>

That's gorgeous, Chris! Tell us about it again. Care to do a write-up?

...lars


------------------
19911995409993004:144444.103512.58274



Join | BC4X4 | .com

 

[chris siebert]

I have made some upgrades to the Dana 300 flip kit. It is now going to have an Atlas II shifter assembly and shift rail guide. This will allow the use of interlocks and hopefully prevent the front axle from popping out of 4 low. It was more expensive than the completely fabricated flip kit, but I think it will be worth it if it prevents popping out of 4 low and has interlocks to prevent high-low combinations. It is still cheaper than Down East Offroads flip kit, and I have read reports of popping out of gear with that kit.

I will be swapping in the new Dana 300 within the next couple of weeks if the weather is decent and will have the underdrive out. If I feel really motivated, I will split it and take pictures of the inside and post them.

Does anyone know of a good FREE program for downsizing the images from a digital camera?

 

[yuhave bigJeep]

Chris what did it cost you to do the kit on the dana 300 and what did you exactly do to it ?
thanks

------------------
89 yj major cash pit

 

[weldid]

Thats the one !! Do you have any pic of the inside how much machining did you do to the inside for bearings ect. I really want to build one. Any help would be great!

Originally posted by Bones:

------------------
Drive it like you stole it

 

[desteurm]

That thing is beautiful, I need one too but to bolt up between a 435 and a 205...!

------------------
Shopping List...
15"x8" wheels 5x5.5" BCD
[email protected]