BC 4x4 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
152 Posts
Discussion Starter · #1 ·
l need a d44 drivers side steering knuckle for my 1975 blazer with a raised steering arm, does that make sense? let me know what you have blazer has 6-8" of lift. if you have it let me know how much, thanks
 

·
Registered
Joined
·
457 Posts
For a 6-8 inch lift I think yea need a drop pitman arm to go with it. I had a raised arm but sold it they are $150ish for the arm. I have a set of knuckles that would work but probably wouldn't work with ur hubs unless they are big bearing spindles already
 

·
Registered
Joined
·
148 Posts
I have a set of stock Dana 44 flat top knuckle

$200 set left and right

[email protected]
Mike
 

·
Registered
Joined
·
152 Posts
Discussion Starter · #6 ·
not interested in buying up all your spare parts only after a drivers side knuckle for my 75 blazer with a raised arm, if you can help me that would be great
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top