BC 4x4 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
173 Posts
Discussion Starter · #1 ·
can anyone help me? My friends chevy 2 4x4 when she puts it in to 4 low in grinds so she has to turn the motor off put in and then start the motor again it only grinds in 4 low and if she goes from 4 low to 4 high and drive it grinds anyone have any idea what to look for?

any ideas are better then none at all
thanks
 

·
Registered
Joined
·
437 Posts
Check the shifter linkages are at there proper settings, and the truck should be in neutral, or see if the shifter is hitting the floor boards anywhere, which would cause the gears not to fully engauge, I used to have that problem when my shifter would get knocked by the floor board and pop out of gear, Hope this helps.

---------------------------
78 3/4T 350 chev
 
1 - 2 of 2 Posts
Top