BC 4x4 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
and that advice need not be to "get a different truck" :) I am looking into a basic body lift at this point, to be followed shortly down the road by a suspension lift. Any advice for a home mechanic on the best (not neccessarily the easiest) way to go about it? I've seen things online like puck-kits and such, and have even looked at coil spacers but am hoping a veteran of the off-road can help out! Thanks for your time!

Sloane.
 

·
Registered
Joined
·
46 Posts
Unfortunately, there's not a lot of aftermarket support for Nissans like there is for Toyotas and Jeeps. The hardbodys shared a lot with the Pathfinders, so you can go to NPORA for lots of info.
I ordered the 3" body lift for my Pathfinder from 4x4parts.com.
 

·
Registered
Joined
·
7 Posts
Discussion Starter #4
Do you know any good shops in the Mainland that can redo leaf springs? My ride seems to be getting a bit rigid...Cheers.
 

·
Registered
Joined
·
207 Posts
calmini puts out a 3 inch suspension lift and i think you can buy it at north shore off road or get it ordered in.
my friend got a 3 inch lift for his pathfinder from some place in the valley like langley or somewhere out there.

here's the link to calmini's website
http://www.purenissan.com/d21_3_kit.htm
 
1 - 5 of 5 Posts
Top