BC 4x4 Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
The rear is a factory Dana 44 housing, should fit in any TJ '97-'06. It has Alloy USA chromoly axles and gears, fully rebuilt with new bearings, gears, seals and axles about 2000km ago. Comes with the original axles as spares. The drivers side spare axle is "tweaked". The "tweaked" axle is still a good spare, it will install and drive without any leaks or damage but it will definitely put a little wiggle in your rear
Rear also has a track bar extension for a 4-6" lift (can be returned to stock easily).
The chromoly axles were $400 by themselves http://www.quadratec.com/products/52400_604_07.htm
Gears and bearings were another $500.
Does not come with brakes.

Front axle is bone stock. stock shafts, original carrier bearings, gears and seals (120,000km). Needs Ball Joints and pinion seal. No Brakes, no steering knuckles. Again, this axle should fit in any '97-'06 TJ. Low Pinion Dana 30. Front Axle Shafts are not in pictures but will be included in the sale.

5 x 4.5 bolt pattern, stock width. The Rear axle can have the bolt pattern changed to 5 x 5.5 easily as it is drilled for both. Both Axles from an '05 TJ Unlimited with about 120K on them.

I'm looking for $1,000.00 as a pair, $800 Rear, $200 Front. OBO.
PIcs Here - http://vancouver.en.craigslist.ca/pml/pts/2648901102.html

Thanks for looking!
 
1 - 1 of 1 Posts
Top