BC 4x4 Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
1,437 Posts
I was thinkin of doin the same, but the donor axle is gunna cost $$$ unless U find one with a busted tube (ya right).
Easier & cheaper (I think) to get aloy shafts and CTM joints.
 

·
Superfly
Joined
·
8,221 Posts
Is a Dana 60's king pin system stronger than the ball joints used on a D44?

That may be one reason, although ball joint breakage/separation is usually a byproduct of a snapped axle shaft.

...lars



Join | BC4X4 | .com
 

·
Registered
Joined
·
1,437 Posts
D60's have a much larger steering U-joint. And stronger ball joint / king pins, from what I've heard. But it's some work to keep your 5x5.5 bolt pattern.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top