BC 4x4 Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
72 Posts
Discussion Starter · #1 ·
I am lookin at a 87 ram charger.. it is 4000 it has 128000 kms on it.. stock.

I drove it and when I would give it alot gas it would stall.. also when I cam to a stop it would stall sometimes.. I let it warm up and run for 15 minutes and it still did it.. it has a 318 with a holly carb..

maybe you could help me out with what it could be? also the oil pressure is abit low to.

What else should I look at? and what problems should I be looking for?

Thanks.....

------------------
[ToYz]>-. 76' CRuiSeR .-<[ToYz]
http://bcoffroad.250x.com
 

·
Registered
Joined
·
112 Posts
Yeah My rambocharger runs like that too
the oil pressure is low because the cam plate is worn ( I had to swap a new oil pump on mine to find this out) you just have to drive them with 2 feet ( one for brake , one for gas...)dont' give the guy $ 4000 you can have mine for that price. 6" softride lift, 35" bfg ATs 360,727,205,44front,60 rear,

------------------
only we make "the whistling sound" www.OTTindustries.com
 

·
Registered
Joined
·
72 Posts
Discussion Starter · #3 ·
Tell me more about your charger... and maybe any pictures?

Thanks...

------------------
[ToYz]>-. 76' CRuiSeR .-<[ToYz]
http://bcoffroad.250x.com
 

·
Registered
Joined
·
25 Posts
Did that model year ramcharger come with a D60 from the factory? Ideas come flooding into my head of a straight swap with my
8 1/4". Does it have drums or disks?
 

·
Registered
Joined
·
112 Posts
Originally posted by kicker_92:
Did the ramcharger or other old dodge trucks come with the 360 engine as an option? If so, what years and what body styles should I be looking for? Must be pre-magnum...

Thanks,

Ryan Gates
Lots of Dodge trucks came with the 360 ( check out the heavier GVW models ) the body style didn't change for 30 odd years so ANY body style will do, and for which trucks came with D60's? 3/4 tons did... they never put them in 'chargers


------------------
only we make "the whistling sound" www.OTTindustries.com

[This message has been edited by AIRZUKI (edited February 03, 2001).]
 

·
Registered
Joined
·
72 Posts
Discussion Starter · #7 ·
hey a AIRZUKI you still have that ram charger for sale? if so let me know.. might still be interested..


------------------
[ToYz]>-. 76' CRuiSeR .-<[ToYz]
http://bcoffroad.250x.com
 

·
Registered
Joined
·
28 Posts
the dodge 318 always have a problem like that I had a 76 ram and the only way I fixed it was to take the manifold off theres a carbon tube and it gets cloched you have to have this cleaned they run so much better after this hope this helps
 
1 - 8 of 8 Posts
Top