BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
189 Posts
hey nateS thought you would appreciate this pic
http://www3.telus.net/bro_greg/

------------------
89 ranger 5" tall and a front lincoln locker
rear auburn and lotsof neat gadgets
 

·
Registered
Joined
·
189 Posts
NateS
the front reciever cost me a 24 of beer at a local machine shop i always take stuff in friday morning cause i know they like a cold beer at the end of the day ,the mount is just a 5"x 3" piece of angle iron 29 1/2 " with a 10" long piece of 2" inside diameter square tubing butted up against the 3" angle and welded all along the sides my only mistake was that regular square tubing has a seam inside that i had to grind down with my dremel ,i think you can get tubing thats cleaner on the inside so the hitch slides in without binding the 3" angle bolts right up to the sway bar mounts and the 5" to the frame ,i'll try to get my bro over with his digi cam to take a picture

------------------
89 ranger 5" tall and a front lincoln locker
rear auburn and lotsof neat gadgets

[This message has been edited by gregjack62 (edited August 03, 2001).]
 

·
Registered
Joined
·
189 Posts
NateS check out the reciever pics i put on your home pg. under misc. pics there is also a description on your message board

great pics by the way
how much air did you get in the B II to dent the roof with the speaker box

------------------
89 ranger 5" tall and a front lincoln locker
rear auburn and lotsof neat gadgets
 
1 - 3 of 3 Posts
Top