BC 4x4 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 ·
Does any one know if a ranger t-case will bolt up to a 3.0 2 wheel drive ranger tranny.
Thanks Jay..


------------------
88 zuk
33's, coil sprung,
locked front and rear,
aka. little devil
http://communities.msn.ca/AdvancedTerrainSuspensions
 

·
Registered
Joined
·
189 Posts
check this out it might help http://trs.rrorc.com/

------------------
89 ranger 5" tall and a front lincoln locker
rear auburn and lotsof neat gadgets
 

·
Registered
Joined
·
1,469 Posts
Originally posted by JAYZUK:
Does any one know if a ranger t-case will bolt up to a 3.0 2 wheel drive ranger tranny.
Thanks Jay..

No. they have different tailhousings. Easier to get the trans and Tcase from the same truck, or use something else with an adapter.

------------------
Drive fast, take chances!
then ponder the wisdom of it all until you get your licence back :)
 
G

·
as far as i know, just unbolt the tailshaft housing from the 2wd, and put the housing from the 4wd tranny on, then the t-case, as far as i know.....

------------------
1987 Ford Ranger S\C reg box. 2wd for now... 30x9.50s, 2" lift. very soon 4.10:1 L/S axle. If I can't be found, you know where I am. Better come looking with a bigass winch!!! That would be me, the one sitting on the 6" of a roof sticking out of the biggest mud hole I could find!
 
1 - 4 of 4 Posts
Top