BC 4x4 Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
127 Posts
You might want to check you free play too
this really does not concern heat as much but if you pedal free play is off a bit it can be more noticeable when the clutch gets hot
 

·
Registered
Joined
·
127 Posts
you should be able to push the pedal by hand with lightish force about an inch and then any further force will move the slave cylinder push rod and disengage the pressure plate from the clutch disc

There is a nut welded to a u shapped bracket and the push rod is threaded, turn the push rod into the nut, while doing this push the pedal by hand and judge about an inch of movement until there is resistence

hope you understand my crude instructions
good luck
Tim
 
1 - 2 of 2 Posts
Top