BC 4x4 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter · #1 ·
what will i need knew if i pute a 305 v8 into my truck witch used to have a 2.8 v6?

------------------
1983 yota bondo job 6'trail master lift, short box, lotsa lights, good frame! 35" dunlops...want 33' muds
 

·
Premium Member
Joined
·
1,362 Posts

·
Registered
Joined
·
608 Posts
I installed a 350 in my s15 by myself. First of all you need to buy the JTR (jags that run) book. They have one for s10 v8 conversions. Check their website. You need a different tranny, new motor mounts(I made my set) new radiator(88 corvette), special oil pan(made from a stock s10 w/4.3L and the one off the v8. There is more but I don't remember. Feel free to ask questions.
 

·
Registered
Joined
·
83 Posts
Hey Ty. Try s10Extremist.org for more info on this swap. Post a question and there's quite a few who have done this swap on that site as well.

------------------
Pi$$ on the ceiling... Any ******* can Pi$$ on the floor.
 
1 - 6 of 6 Posts
Top