BC 4x4 Forums banner
1 - 4 of 4 Posts

·
Premium Member
Joined
·
1,541 Posts
Discussion Starter · #1 ·
I took my sways bars off and drove around for a week and hated it! Everyone has there own thoughts on this but i hated it. But off road the difference was amazing.

I dont got alot of $$ so i wanna make my own sway bar disconnects so anyone have any plans or ideas how to do this??

------------------
92 Jeep YJ with 1 inch shackle lift and a 2 inch body lift running 31's
 

·
Got Arbutus?
Joined
·
1,269 Posts
very easy to do. just get some stock ones and cut them in half then go and get 2 4" pieces of 1/2" I.D 3/4" O.D DOM tubing and weld it onto one of the halves of sway bar. then just put the welded DOM and other sway bar piece in the drill press and drill 1/8" or maybe larger holes through them. then send a 1/8" pin through. you must make sure both sway bars will be the same overall length otherwise they will be vary hard to re connect.

------------------
'93 sahara ~ rancho springs, SOA, EB axles, detroit, 35s, and hi steer in the works
 

·
Premium Member
Joined
·
1,541 Posts
Discussion Starter · #3 ·
thanks cornjeeper

i owe u one

------------------
92 Jeep YJ with 1 inch shackle lift and a 2 inch body lift running 31's
 
1 - 4 of 4 Posts
Top