BC 4x4 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
401 Posts
yep Samurais's


That is a 5 on 5.5" pattern same as old CJ's, older ford trucks, scouts etc.

------------------
IRC member
1986 radio flyer, red
 

·
Registered
Joined
·
6 Posts
all 1/2 ton, ford truck wheels should have the same bolt pattern as the tracker/sidekick/samurai wheels.

------------------
keep the rubber side down
 

·
Registered
Joined
·
6 Posts
As far as I know you shouldn't have to worry about the offset, as long as you don't run tires that are too big (on a sidekick at least) I think you can goe as big as 235/75/R15 but I'm not sure, I'd have to ask a friend of mine.

------------------
keep the rubber side down
 

·
Registered
Joined
·
8 Posts
Discussion Starter · #6 ·
Originally posted by SYCO:
As far as I know you shouldn't have to worry about the offset, as long as you don't run tires that are too big (on a sidekick at least) I think you can goe as big as 235/75/R15 but I'm not sure, I'd have to ask a friend of mine.

Do you mean on a stock wheel? I was planning on running a 31" tire if at all possible. I know it won't fit at stock hight but that shouldn't be a problem or I just might do some cutting. Not sure yet though.
 
1 - 6 of 6 Posts
Top