BC 4x4 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I want to run an NP435 in my toy 4runner I have a Dana 60 rear end and a D44HD front out of a chevy. My question is ... Is there any Chevy transfercases that will bolt up to the NP435...(I have heard that some chevy's came with the same tranny). Please help .. I am supposed to go pick up a NP435 on Sunday. Thanks

------------------
Friends help you move...Real friends help you move a body.
 

·
Registered
Joined
·
382 Posts
Hey Forota, some of the late 80's early 90's chev 1-ton trucks (like crew cab 's etc...) had NP 205's with the six bolt round pattern of the NP208 ,If you could find one of these you could (with some swapping around) use the factory NP435 to 205 (Ford) adapter and swap the input gears from the Ford 205 into the Chev 205 (Ford is 31 spline Chev is 32 spline , make's you wonder right?) The other option if you have Cubic Dollars to spend.... get the Klune -V planetary box and order it with the Ford input and the Chev output,then you will have some MAJOR kickass low gears.....



------------------
1948 WILLYS flatfender/toyota
Soon to require a Mile -per - year speedometer http://www.ottindustries.com
 
1 - 3 of 3 Posts
Top