BC 4x4 Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

I bought a pair of 5.29 8" ring, pinion, and bearing sets, installed one in the rear diff, my front diff however is a 7.5" housing.

I figure it's easier to find a housing than find/trade 8" 5.29's for a 7.5" set

Any help would be appreciated.
 

·
Registered
Joined
·
1,764 Posts
Re: Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

are you doing a solid axle swap?
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #3 ·
Re: Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

I'd rather keep it IFS...I've done a tonne of work to it already... I just want to be done with it sooner.
 

·
Registered
Joined
·
1,764 Posts
Re: Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

all ifs diffs are 7.5" so if you want 8" you have to go solid axle, or swap a centered supra center section or something like that to get a 8" ring and pinion
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #5 ·
Re: Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

ahhh, ok. Looks like my best option for now is to find a smaller ring. Thank you very much.
 

·
Registered
Joined
·
1,764 Posts
Re: Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

no problem, good luck :D
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #7 ·
Re: Wanted: 8" Housing and Carrier for the front diff IFS of a '91 4Runner

Sorry, one other question. reverse rotation, or standard? I can't seem to locate any info on Google effectively....
 
1 - 7 of 7 Posts
Top