BC 4x4 Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I just finished rebuilding my 84 22r, I had it bored out, and I put in a Shadbolt camshaft. When we started it up, we ran it for ten minutes and all my water from the cooling system went into my exhaust pipe. Took the head off and got it check again and had it resurfaced. Put everything where it was supposed to go and used a new headgasket...and started it up again and ran it for 15 minutes. Still loosing cooling water into the exhaust pipe. My cylinders have no water in them.

Can anyone give me an idea where to look next for the leak.

Thanks for any information.

Jeff
 
1 - 1 of 1 Posts
Top